Lanové HEA panely
Vysoce tuhá síť pro ochranu proti padání kamení
HEA Panely Maccaferri (Lanové panely s vysokou absorpcí energie) představují nejtužší produkty v portfoliu síťových opláštění systémem Mac.RO™. HEA panely MACCAFERRI nabízejí extrémní pevnost při nízkém přetvoření a deformaci. Tuhost sítového opláštění je mnohem důležitější než pevnost sítí v tahu, jelikož ovlivňuje deformaci opláštění při zatížení Panely jsou tkané z jednoho kusu vysokopevnostního ocelového lana o souvislé délce spojeného v každém bodě křížení patentovaným spojem HEA „dvojitý uzlový spoj“.
Na rozdíl od rombických spirálových lanových sítí poskytuje konstrukce HEA panelů výjimečný výkon při zatížení s minimálním prodloužením při nejnižší možné deformaci. Panely HEA se používají jako součást kotvených síťových opláštění při aplikacích, kde se vyžaduje systém s nízkou deformací opláštění a vysokou pevností. Díky víceosému působení panelu se zatížení efektivně přenášejí na kotvy v líci svahu bez ohledu na rastr kotení.
Patentované uzlové spojení dvou sousedních lan se získá spletením páru ocelových drátů tl. 3,00 mm pozinkovaných slitinou Galmacu, slitina zinku a hliníku (5%). Spletené dráty těsně obepínají lana v místě jejich křížení. Panel je vyroben ze čtvercových sítí vyrobených z jednoho kusu lana a po obvodu je zajištěn přídavným obvodovým lanou s lisovanými hliníkovými spojkami dle EN 13411-3
Success Stories
Built, not just drawn
Discover more
CANTERA ZIORDIA
The Ziordia quarry has an orography formed by limestone rock, with steep slopes as a result of quarrying, and potentially unstable large blocks. The company CRS Ingeniería contacted Bianchini Ingeniero to analyse the situation and possible solutions, and subsequently the company Inaccés Geotècnica Vertical also intervened. One of the main risks was the blocks that could fall from a 40-metre-high, 15-metre-wide mochón, located on one of the quarry's usual passageways. This represented a potential risk for the installations and the workers themselves. Therefore, a series of actions were carried out to stabilise these blocks and protect the area.
Discover more
PASSAGEM INFERIOR DA RODOVIA BR-101 EM ESCADA
Brazil
A viaduct project was carried out on BR-101, in the municipality of Escada-PE, in the direction from Recife to Maceió, to create a turnaround point. During the construction of the project, the road's profile needed to be changed, raising its levels through the construction of embankments. However, the lateral projection of the embankment would intersect with the turnaround road if the slope was not made vertical with an appropriate retaining structure.
Discover more
PRESA FRANCISCO ABELLÁN
Spain
The Francisco Abellán reservoir is located near the town of Lopera, in the center of the province of Granada. It is fed mainly by the tributary of the river Fardes, which in turn is fed by the river Guadiana Menor and covers an area of 1847. 40 km2. The reservoir contains Miocene sedimentary materials such as sandstones, marlstones and calcarenites. In the extreme north-east, there is an alternation of these three materials and two problems: The first is in the upper sandstone bench due to the presence of unstable blocks, some of them of large size. The second problem is in the lower bank, where unstable blocks and roofs are also observed as a result of differential erosion. On the other hand, on the northwest slope (NW) there is access to the monitoring station which is unprotected against falling rocks.
Discover more
Deep dive into
Lanové HEA panely
What we can do with
Lanové HEA panely
Get in touch with us
[contactForm_txtSuccessSubmit]